Filter
Top Products
189
DES-3550:4#enable sim
Command: enable sim
Success.
DES-3550:4#
disable sim
Purpose Used to disable Single IP Management(SIM) on the switch
Syntax
disable sim
Description This command will disable SIM globally on the switch..
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable SIM on the switch:
DES-3550:4#disable sim
Command: disable sim
Success.
DES-3550:4#
show sim
Purpose Used to view the current information regarding the SIM group on the
switch.
Syntax
show sim {[candidates{<candidate_id 1-32>} |
members{ <member_id 1-32>} | group {commander_mac
<macaddr>} | neighbor]}
Description This command will display the current information regarding the SIM
group on the switch, including the following:
SIM Version - Displays the current Single IP Management version on
the switch.
Firmware Version - Displays the current Firmware version on the
switch.
Device Name - Displays the user-defined device name on the switch.
MAC Address - Displays the MAC Address of the switch.
Capabilities – Displays the type of switch, be it Layer 2 (L2) or Layer 3