Filter
Top Products
180
DES-3550:4#show authen server_host
Command: show authen server_host
IP Address Protocol Port Timeout Retransmit Key
--------------- -------- ----- ------- --------------- --------
10.53.13.94 TACACS 49 5 2 No Use
Total Entries : 1
DES-3550:4#
create authen server_group
Purpose Used to create a user-defined authentication server group.
Syntax
create authen server_group <string 15>
Description This command will create an authentication server group. A server
group is a technique used to group tacacs/xtacacs/tacacs+ server
hosts into user defined categories for authentication using method
lists. The user may add up to eight (8) authentication server hosts to
this group using the
config authen server_group
command.
Parameters <string 15> Enter an alphanumeric string of up to 15 characters to
define the newly created server group.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create the server group “group_1”:
DES-3550:4#create server_group group_1
Command: create server_group group_1
Success.
DES-3550:4#
config authen server_group
Purpose Used to create a user-defined authentication server group.
Syntax
config authen server_group [tacacs | xtacacs | tacacs+ | <string
15>] [add | delete] server_host <ipaddr> protocol [tacacs |
xtacacs | tacacs+]
Description This command will configure an authentication server group. A
server group is a technique used to group tacacs/xtacacs/tacacs+
server hosts into user defined categories for authentication using
method lists. The user may define the type of server group by
protocol or by previously defined server group. Up to eight (8)