Filter
Top Products
157
delete iproute default
Description This command will delete an existing default entry from the switch’s
IP routing table.
Parameters none
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the default IP route 10.53.13.254:
DES-3550:4#delete iproute default 10.53.13.254
Command: delete iproute default 10.53.13.254
Success.
DES-3550:4#
show iproute
Purpose Used to display the switch’s current IP routing table.
Syntax
show iproute {<network_address>} {static}
Description This command will display the switch’s current IP routing table.
Parameters
<network_address> − IP address and netmask of the IP interface
that is the destination of the route. You can specify the address and
mask information using the traditional format (for example,
10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
static – use this to display static iproute entries.
Restrictions none.
Example Usage:
To display the contents of the IP routing table:
DES-3550:4#show iproute
Command: show iproute
Routing Table
IP Address/Netmask Gateway Interface Hops Protocol
--------------- --------------- --------------- ---- -----------
0.0.0.0 10.1.1.254 System 1 Default
10.0.0.0/8 10.48.74.122 System 1 Local
Total Entries: 2
DES-3550:4#