Filter
Top Products
47
config snmp system_location
characters can be used.
Parameters <sw_location> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no location desired.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the switch location for “
HQ 5F
”:
DES-3550:4#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DES-3550:4#
config snmp system_name
Purpose Used to configure the name for the switch.
Syntax
config snmp system_name {<sw_name>}
Description The config snmp system_name command configures the name of
the switch.
Parameters <sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the switch name for “
DES-3550 Switch
”:
DES-3550:4#config snmp system_name DES-3550 Switch
Command: config snmp system_name DES-3550 Switch
Success.
DES-3550:4#
enable rmon
Purpose Used to enable RMON on the switch.
Syntax
enable rmon