Filter
Top Products
16
DES-3550:4#enable clipaging
Command: enable clipaging
Success.
DES-3550:4#
disable clipaging
Purpose
Used to disable the pausing of the console screen scrolling at the end
of each page when the show command displays more than one
screen of information.
Syntax disable clipaging
Description
This command is used to disable the pausing of the console screen
at the end of each page when the show command would display
more than one screen of information.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To disable pausing of the screen display when show command output reaches the end of the page:
DES-3550:4#disable clipaging
Command: disable clipaging
Success.
DES-3550:4#
enable telnet
Purpose
Used to enable communication with and management of the switch
using the Telnet protocol.
Syntax enable telnet <tcp_port_number 1-65535>
Description
This command is used to enable the Telnet protocol on the switch.
The user can specify the TCP or UDP port number the switch will use
to listen for Telnet requests.
Parameters
<tcp_port_number> − The TCP port number. TCP ports are
numbered between 1 and 65535. The “well-known” TCP port for the
Telnet protocol is 23.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To enable Telnet and configure port number: