Filter
Top Products
179
DES-3550:4#delete authen server_host 10.1.1.121 protocol
tacacs+
Command: delete authen server_host 10.1.1.121 protocol tacacs+
Success.
DES-3550:4#
show authen server_host
Purpose Used to view a user-defined authentication server host.
Syntax
show authen server_host
Description This command is used to view user-defined authentication server
hosts previously created on the switch.
The following parameters are displayed:
IP address – The IP address of the authentication server host.
Protocol – he protocol used by the server host. Possible results will
include tacacs, xtacacs and tacacs+.
Port – The virtual port number on the server host. The default value
is 49.
Timeout - The time in seconds the switch will wait for the server host
to reply to an authentication request.
Retransmit - The value in the retransmit field denotes how many
times the device will resend an authentication request when the
TACACS server does not respond. This field is inoperable for the
tacacs+ protocol.
Key - Authentication key to be shared with a configured TACACS+
server only.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To view authenticaion server hosts currently set on the switch: