Filter
Top Products
183
DES-3550:4#show authen server_group
Command: show authen server_group
Group Name IP Address Protocol
--------------- --------------- --------
Darren 10.53.13.2 TACACS
tacacs 10.53.13.94 TACACS
tacacs+ (This group has no entry)
xtacacs (This group has no entry)
Total Entries : 4
DES-3550:4#
config authen parameter response_timeout
Purpose Used to configure the amount of time the switch will wait for a user to
enter authentication before timing out.
Syntax
config authen parameter response_timeout <int 1-255>
Description This command will set the time the switch will wait for a response of
authentication from the user.
Parameters response_timeout <int 1-255> - Set the time, in seconds, the switch
will wait for a response of authentication from the user attempting to
log in from the command line interface or telnet interface.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the response timeout for 60 seconds:
DES-3550:4# config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DES-3550:4#
config authen parameter attempt
Purpose Used to configure the maximum number of times the switch will
accept authentication attempts.
Syntax
config authen parameter attempt <int 1-255>
Description This command will configure the maximum number of times the
switch will accept authentication attempts. Users failing to be