Filter
Top Products
130
DES-3550:4#config radius delete 1
Command: config radius delete 1
Success.
DES-3550:4#
config radius
Purpose Used to configure the switch’s RADIUS settings.
Syntax
config radius <server_index 1-3> {ipaddress <server_ip> | key
<passwd 32> | auth_port <udp_port_number 1-65535> |
acct_port <udp_port_number 1-65535>}
Description
The
config radius
command is used to configure the switch’s
Radius settings.
Parameters
<server_index 1-3> − Assigns a number to the current set of
RADIUS server settings. Up to 3 groups of RADIUS server settings
can be entered on the switch.
<server_ip> − The IP address of the Radius server.
key − Specifies that a password and encryption key will be used
between the switch and the RADIUS server.
<passwd 32> − The shared-secret key used by the RADIUS server
and the switch. Up to 32 characters can be used.
default − Uses the default udp port number in both the “auth_port”
and “acct_port” settings.
auth_port <udp_port_number> − The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number> − The UDP port number for
accounting requests. The default is 1813.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the RADIUS settings: