Filter
Top Products
91
config mirror port
level users can issue this command.
Example usage:
To add the mirroring ports:
DES-3550:4# config mirror port 1 add source ports 2-7 both
Command: config mirror port 1 add source ports 2-7 both
Success.
DES-3550:4#
config mirror delete
Purpose Used to delete a port mirroring configuration|
Syntax
config mirror port <port> delete source port <portlist> [rx | tx |
both]
Description This command is used to delete a previously entered port mirroring
configuration.
Parameters
<port> − This specifies the Target port (the port where mirrored
packets will be received).
<portlist> − This specifies a range of ports that will be mirrored. That
is, the range of ports in which all traffic will be copied and sent to the
Target port.
rx − Allows the mirroring of only packets received by (flowing into)
the port or ports in the port list.
tx − Allows the mirroring of only packets sent to (flowing out of) the
port or ports in the port list.
both − Mirrors all the packets received or sent by the port or ports in
the port list.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the mirroring ports:
DES-3550:4#config mirror port 1 delete source port 2-4
Command: config mirror 1 delete source 2-4
Success.
DES-3550:4#