Filter
Top Products
153
config arpentry
address of an entry in the switch’s ARP table.
Parameters
<ipaddr> − The IP address of the end node or station.
<macaddr> − The MAC address corresponding to the IP address
above.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To configure a static arp entry for the IP address 10.48.74.12 and MAC address 00:50:BA:00:07:36:
DES-3550:4#config arpentry 10.48.74.12 00-50-BA-00-07-36
Command: config arpentry 10.48.74.12 00-50-BA-00-07-36
Success.
DES-3550:4#
delete arpentry
Purpose Used to delete a static entry into the ARP table.
Syntax
delete arpentry {[<ipaddr> | all]}
Description This command is used to delete a static ARP entry, made using the
create arpentry command above, by specifying either the IP address
of the entry or all. Specifying all clears the switch’s ARP table.
Parameters
<ipaddr> − The IP address of the end node or station.
all − deletes all ARP entries.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To delete an entry of IP address 10.48.74.121 from the ARP table:
DES-3550:4#delete arpentry 10.48.74.121
Command: delete arpentry 10.48.74.121
Success.
DES-3550:4#
config arp_aging time
Purpose Used to configure the age-out timer for ARP table entries on the
switch.