Filter
Top Products
123
DES-3550:4#show 802.1x auth_configuration ports 1
Command: show 802.1x auth_configuration ports 1
802.1X : Enabled
Authentication Mode : Port_based
Authentication Protocol : Radius_Eap
Port number : 1
Capability : None
AdminCrlDir : Both
OpenCrlDir : Both
Port Control : Auto
QuietPeriod : 60 sec
TxPeriod : 30 sec
SuppTimeout : 30 sec
ServerTimeout : 30 sec
MaxReq : 2 times
ReAuthPeriod : 3600 sec
ReAuthenticate : Disabled
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show 802.1x auth_state
Purpose Used to display the current authentication state of the 802.1x server
on the switch.
Syntax
show 802.1x auth_state {ports <portlist>}
Description The show 802.1x
auth_state
command is used to display the current
authentication state of the 802.1x Port-based Network Access Control
server application on the switch.
Parameters
ports<portlist>
−
Specifies a port or range of ports to be viewed.
The following details what is displayed:
Port number − Shows the physical port number on the switch.
Auth PAE State: Initalize|Disconnected|Connecting|
Authenticating|Authenticated|Held |ForceAuth|ForceUnauth − Shows
the current state of the Authenticator PAE.
Backend State: Request|Response|Fail| Idle|Initalize|Success
|Timeout − Shows the current state of the Backend Authenticator.
Port Status: Authorized|Unauthorized − Shows the result of the
authentication process. Authorized means that the user was
authenticated, and can access the network. Unauthorized means that
the user was not authenticated, and cannot access the network.