Filter
Top Products
17
DES-3550:4#enable telnet 23
Command: enable telnet 23
Success.
DES-3550:4#
disable telnet
Purpose
Used to disable the Telnet protocol on the switch.
Syntax disable telnet
Description
This command is used to disable the Telnet protocol on the switch.
Parameters
None.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To disable the Telnet protocol on the switch:
DES-3550:4#disable telnet
Command: disable telnet
Success.
DES-3550:4#
enable web
Purpose
Used to enable the HTTP-based management software on the
switch.
Syntax enable web <tcp_port_number 1-65535>
Description
This command is used to enable the Web-based management
software on the switch. The user can specify the TCP port number
the switch will use to listen for Telnet requests.
Parameters
<tcp_port_number>
−
The TCP port number. TCP ports are
numbered between 1 and 65535. The “well-known” port for the Web-
based management software is 80.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To enable HTTP and configure port number: