Filter
Top Products
5 - 88
NGA 2000
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
7) Fine adjustment of the analog output:
• If you press the F5 key in the menu "Analog Outputs" you can change to the submenu
"Fine Adjustment", where you can do the fine adjustments of the analog output:
• In the line "Output number" appears the output number selected in the menu "Analog
Outputs". If you want, you can select another output in the submenu "Fine
Adjustment":
„ Press the 88 -key or the →→ -key to select the output number and adjust the value
you want with the ↑↑ -key or the ↓↓ -key. Options: 1, ... , 8.
„ Confirm the number selected with the 88 -key.
Fine adjustment setup of the analog output:
• Press the 88 -key or the →→ -key in the line "Operation mode" to select the parameter
and adjust one of the following parameters with the ↑↑ -key or the ↓↓ -key:
„ Normal: The absolute measurement signal will be sent to the analog output.
„ Adjust 0V: Coordination between the display and the analog output for 0V with fine
adjustment 0%.
„ Adjust 10V: Coordination between the display and the analog output for 10V with
fine adjustment 100%.
• Confirm the new parameter with the 88 -key.
• Change to the following lines with the ↑↑ -key or the ↓↓ -key.
• Press the 88 -key or the →→ -key in the line "Fine adjustment for 0% output" or "Fine
adjustment for 100% output" to select the corresponding value.
• Adjust the value you want with the ↑↑ -key or the ↓↓ -key and confirm it with the 88 -key.
Options: 3500 - 4800 for 0% and 750 - 900 for 100%.
F2 key (Updates):
• With the F2 key you can change to the submenu "Analog Output Updates per Second".
The last three lines of variables in the menu "Analog Outputs" only display some values of
the analog output! They are not available.
Measure Back...
TAG
F1 F2 F3 F4 F5
95.00 ppm
-- Fine Adjustment --
Operation mode: Normal
Fine adjustment for 100% output: 799
Fine adjustment for 0% output: 4097
Output number: 1
Updates