Filter
Top Products
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
NGA 2000
6 - 7
Main Menu — System configuration and diagnostics
↓↓
Security codes
↓↓
In the menu "Security Setup" you can enable a security code for the entering of the "Basic
level" as well as for the "Expert level" and for the "System level".
Caution: If you enable a security code and forget it, you will not have any possibility to
enter the locked level!
How to setup and to enable the security codes:
1) Determination of the code number for the:
• "Basic level" (factory setting: 12345):
• "Expert level" (factory setting: 12345):
• "System level" (factory setting: 54321):
„ Go to the line
„ "Define basic level security PIN..." resp.
„ "Define expert level security PIN..." resp.
„ "Define system level security PIN..."
„ with the ↑↑ -key or the ↓↓ -key and change to the corresponding submenu with the 88 -
key or the →→ -key (see illustration on the next page; "basic level" as example).
• Put in the code you want with the function keys F1, ..., F5:
„ The sequence of the code numbers will appear in the line "Actual PIN".
• Notes:
„ "1" is attached to F1, "2" to F2 and so on. The characters displayed above the
function keys will not be displayed as code numbers.
„ If your input was wrong, you can repeat as often as you want until the sequence of
the digits will be in your way.
„ If the input of the security code is done, you can go back to the menu "Security
Setup" with the ←← -key.
Measure Back...
TAG
F1 F2 F3 F4 F5
37.50 ppm
-- Security Setup --
Basic level security: Disabled
Expert level security: Disabled
System level security: Disabled
Define expert level security PIN...
Define system level security PIN...
Define basic level security PIN...
6.3 Security Codes