Filter
Top Products
4 - 32
NGA 2000
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
Measure Channel Back...
TAG
F1 F2 F3 F4 F5
37.50 ppm
-- Analyzer Operation Settings --
Remote control: Enabled
Range: 1
Range upper limit: 50.00 ppm
Span gas concentration: 50.00 ppm
t90-time: 2.00 s
Hours of operation: 164
Range change control: Manual
Last re-start occured: 8:40:35 June 22, 1998
Actual zero gas concentration: 0.00 ppm
Auto-start procedures...
Measure Back...
TAG
F1 F2 F3 F4 F5
37.50 ppm
-- Auto-Start Procedures --
Position in auto-start list: 1
Channel tag: -
Procedure type: -
Interval mode: Never
Start time: -
Start date: -
Time & Date: 16:03:25 June 22, 1998
Display Status... Main... Channel Calib...
TAG
F1 F2 F3 F4 F5
Failures: No
Maintenance-Requests: No
Temperature: 20.0 C
Operation: Ready
Range: 1
37.50 ppm CH4
0.00 50.00
0.0 100.0
⇒ ⇒ Change to the
submenu "Auto-
Start Procedures"
Press
⇒ ⇒ Change to the
single component
display
Note:
In the menu
"Auto-Start Procedures"
you can control the status
of the three kinds of time
controlled calibrations.
(see 5.1.1 p. 5-12/13)
⇒ ⇒ Back to the single
component display
of the current
channel