Filter
Top Products
6 - 10
NGA 2000
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
2) Selecting the I/O module:
• Change to the line you want with the ↑↑ -key or the ↓↓ -key.
If there are more than eight unbound I/O modules available, you can change to
another menu page with the F5 key (>>>).
• Press the 88 -key or the →→ -key to select the tag of the I/O module:
The display will go back to the menu "Module binding" automatically.
• Repeat the steps 1) and 2) as often as necessary until all modules you want to bind
will be selected.
3) Binding:
• Press the F4 key (Bind!) to change to the submenu "Bind Modules Selected":
• Press the F3 key (Bind !) to bind the modules selected:
The control module will change to the initializing mode and the binding will be done
automatically.
Measure Bind ! Back...
TAG
F1 F2 F3 F4 F5
37.50 ppm
-- Bind Modules Selected --
Press BIND to bind the modules.
Syscal I/O
Autocal I/O