Filter
Top Products
4 - 48
NGA 2000
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
Yes Back...
TAG
F1 F2 F3 F4 F5
37.50 ppm
-- Confirmation Required --
Do you really want to do this ??
Press "Yes" or "Back..."
TAG
F1 F2 F3 F4 F5
37.50 ppm
- S U C C E S S -
- The selected function has been started/executed -
(Wait a moment...)
Measure Status... Channel Back...
TAG
F1 F2 F3 F4 F5
0.00 ppm
-- Set Gas Valves --
Flow sample gas !
Flow zero gas !
Valve position: Zerogas
Operation status: Ready
Flow span gas !
Close all valves !
Flow test gas !
⇒ ⇒ Confirm the order to
flow zero gas
Press
F2
to start the zero
gas flow immediately.
Option:
Press the F4 key if you want
to cancel the order and go
back to the menu "Set Gas
Valves".
Note:
The display of this message
depends on the setup in the
expert configurations.
(see 5.1.8 p. 5-49)
⇒ ⇒ Confirmation
message of the
function start
appears
Note:
This message will be
displayed after the function
has been started. Then the
display will jump automatic-
ally to the menu "Set Gas
Valves".
⇒ ⇒ Change to the single
component display
of the current
channel
Options:
• Start the gasflow with
span gas, sample gas
or test gas.
• Close all valves.
• F3 key: Changing to
another available channel
to execute gas flow.
• F4 key: Go back to the
menu "Analyzer Module
Calibration" to start
zeroing or spanning.