Filter
Top Products
Index - 4
NGA 2000
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
S
Sample Gas
flow 4-55
pressure 5-81
unit 5-54
Save/Load Analyzer Module Config. 5-64
Security Codes 6-7
Sensor Value 5-60
Serial Interface
load/send configuration 5-64
setup 5-72, 5-89
Signal
codes 5-38...40, 5-75...77
on mini-bargraph 5-49/50
Single Component Display 3-1, 4-33, 5-49
auxiliary lines 7-1...4
SIO Module 1-1...3, 5-68, 5-84
analog output 5-69, 5-85
auxiliary 5-84
local 5-68
relay output 5-73
serial interface 5-72, 5-89
Softkey 3-3
Span Gas
calibration 4-43, 5-15...19
concentration 5-6
definition 5-6
flow 4-51
"ppm → mg/Nm
3
" conversion factor 5-6
pressure 5-81
ranges 5-11
unit 5-6
Stability Time 5-9/10
Stability Tolerances 5-7
Starting and Initializing 3-1
Status 3-4
analyzer channel 4-3, 5-16
calibration procedure 4-37, 5-17
details 4-5...30
Switch Level Hysteresis 5-30
System Auto Calibration
I/O Module 1-1, 5-99, 6-9
System
modules 6-12
reset 6-4, 6-11
tag 6-1
T
Tag
channel 3-2
range 5-49/51
system 6-1
Temperature 5-63
Test Gas 4-59, 5-15/16
Time and Date 6-6
Time Controlled Calibration 5-12
Tolerances 5-7
T
90
-Time 5-28
U
Units
calculator results 5-47
flow 5-62
pressure 5-60/61
sample gas 5-54
span gas 5-6
temperature 5-63
Upper Explosion Limit (UEL) 5-54
V
Valve(s)
close all 4-63
position 5-12
Variables, line of 3-3
Z
Zero Gas
calibration 4-39, 5-15...19
concentration for all ranges 5-20
flow 4-47