Filter
Top Products
4.2 Single Component Display
Change of Channel
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
NGA 2000
4 - 33
Display Status... Main... Channel Calib...
MLT25/CH1/R2
F1 F2 F3 F4 F5
0.0 100.0Temperature: 25.0 C
Maintenance-Requests: No
Any_Alarms: No
Operation: Ready
Range: 2
2.50 %CO2
0 5.00
Display Status... Main... Channel Calib...
MLT25/CH2/R2
Temperature: 25.0 C
Maintenance-Requests: No
F1 F2 F3 F4 F5
95.00 ppm CO
0 250
Range: 2
0.0 100.0
Any_Alarms: No
Operation: Ready
Display Status... Main... Channel Calib...
MLT25/CH1/R2
F1 F2 F3 F4 F5
0.0 100.0Temperature: 25.0 C
Maintenance-Requests: No
Any_Alarms: No
Operation: Ready
Range: 2
2.50 %CO2
0 5.00
⇒ ⇒ Change to the single
component display
of another channel
Press
F4
Example:
Changing from
CO
2
(Channel 1) to
CO (Channel 2)
⇒ ⇒ Change back to the
single component
display of the
starting channel
Press
F4
as often
as necessary to get the
display of the channel
you want
Note:
You can reach any existing
channel by pressing the F4
key for several times.
⇒ ⇒ Single component
display of the
starting channel
appears