Filter
Top Products
Exatron 3000B
www.exatron.com 2-3 Chapter 2 Installation
5. Save the bolts and their washers with the wooden base and return them to the shipping
container.
6. Replace the internal carton and the top cushion panel.
7. Carefully examine the space between the container and the four side cushion panels for any
additional parts
since Tube Holder extensions and sample devices are often packed in these
spaces.
8. Replace all packing material and internal boxes.
The shipping carton should now be ready for
storage -
DO NOT DISCARD!
If it becomes necessary to return this handler to Exatron, use this
shipping container and re-pack the handler in the reverse order of the unpacking procedure described
above.
UNPACKING THE POWER SUPPLY
The power supply is shipped in a separate 20" x 18" x 18" cardboard box.
Open the box with the "DELICATE INSTRUMENT" label side up and remove the top internal box
containing handler peripherals, such as: Octoloader Plate, Air Regulator, Shuttle, User's Manual
and Power Cords.
Set these items aside.
Open the bottom internal box and remove the power supply using both hands.
Set the power
supply aside and return the packing material to the empty box. The shipping carton should now be ready
for storage - DO NOT DISCARD! Proceed with the unpacking/assembly instructions. If you have not
purchased a Free Rolling Exatron Dolly, or FRED, skip the following step.
UNPACKING THE FRED/AMBIENT ASSEMBLY
Tools required: One standard flat-bladed screwdriver
One Phillips head screwdriver
Size 6 Allen wrench