Filter
Top Products
Exatron 3000B
www.exatron.com 5-16 Chapter 5 Diagnostics
;
;;
;
ALL MOTOR CHECK: Octoloader Motor Check
__________________________________________________________________
This diagnostic tests input port C6, output port C6, C9 located on PCB #5000-397, PAL 397-5, U9.
TO ENTER THIS CHECK:
WARNING: VERIFY THAT THE OCTOLOADER IS EMPTY OF ALL DEVICES BEFORE USING THIS
DIAGNOSTIC.
Handler displays
DIAGNOSTICS
Press the
[4]
key.
Handler displays
ALL MOTOR CHECK
Press the
[3]
key.
Handler displays
OCTO MOTOR CHK
Press the
[1]
key:
1 LEFT STEP
. The Octoloader will move one tube to the left.
Press the
[2]
key: the handler will display the current motor settings in RAM. This display is helpful when
trying to increase the motor's speed.
Press the
[3]
key:
1 RIGHT STEP
. The Octoloader will move one tube to the right.
Press the
[4]
key:
2 LEFT STEPS
. The Octoloader will move two tubes to the left.
Press the
[6]
key:
2 RIGHT STEPS
. The Octoloader will move two tubes to the right.
Press the
[7]
key:
JOG LEFT
. The Octoloader will move one step to the left, about .006".
Press the
[9]
key:
JOG RIGHT
. The Octoloader will move one step to the right, about .006".
Press the
[0]
key:
MOTOR OFF
. The Octoloader Motor is now off.
Pressing the
[Clear]
button will flash the terminal's displayed message to confirm the handler is still in this
specific diagnostic check.
Press the
[Enter]
button to EXIT this diagnostic check.