Filter
Top Products
254 Fortinet Inc.
Configuring traffic filter settings Logging and reporting
Configuring traffic filter settings
Use the following procedure to configure the information recorded in all traffic log
messages.
1 Go to Log&Report > Log Setting > Traffic Filter.
2 Select the settings that you want to apply to all Traffic Log messages.
3 Select Apply.
Figure 44: Example traffic filter list
Adding traffic filter entries
Add entries to the traffic filter list to filter the messages that are recorded in the traffic
log. If you do not add any entries to the traffic filter list, the FortiGate records all traffic
log messages. You can add entries to the traffic filter list to limit the traffic logs that are
recorded. You can log traffic with a specified source IP address and netmask, to a
destination IP address and netmask and for a specified service. A traffic filter entry
can include any combination of source and destination addresses and services.
Use the following procedure to add an entry to the traffic filter list.
1 Go to Log&Report > Log Setting > Traffic Filter.
2 Select New.
3 Configure the traffic filter for the type of traffic that you want to record on the traffic log.
Resolve IP Select Resolve IP if you want traffic log messages to list the IP address
and the domain name stored on the DNS server. If the primary and
secondary DNS server addresses provided to you by your ISP have not
already been added, go to System > Network > DNS and add the
addresses.
Type Select Session or Packet. If you select Session, the FortiGate unit records
the number of packets sent and received for each session. If you select
Packet, the FortiGate unit records the average packet length for each
session (in bytes).
Display Select Port Number if you want traffic log messages to list the port
number, for example, 80/tcp. Select Service Name if you want traffic log
messages to list the name of the service, for example, TCP.
Name Type a name to identify the traffic filter entry.
The name can contain numbers (0-9), uppercase and lowercase
letters (A-Z, a-z), and the special characters - and _. Spaces and
other special characters are not allowed.
Source IP Address
Source Netmask
Type the source IP address and netmask for which you want the
FortiGate unit to log traffic messages. The address can be an
individual computer, subnetwork, or network.