Filter
Top Products
Debug Module
MCF52211 ColdFire® Integrated Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 28-45
or.l Dy,<ea>x PST = 0x1, {PST = 0xB, DD = source}, {PST = 0xB, DD = destination}
ori.l #<data>,Dx PST = 0x1
pea.l <ea>y PST = 0x1, {PST = 0xB, DD = destination operand}
pulse PST = 0x4
rems.l <ea>y,Dw:Dx PST = 0x1, {PST = 0xB, DD = source operand}
remu.l <ea>y,Dw:Dx PST = 0x1, {PST = 0xB, DD = source operand}
rts PST = 0x1, {PST = 0xB, DD = source operand},
PST = 0x5, {PST = [0x9AB], DD = target address}
scc.b Dx PST = 0x1
sub.l <ea>y,Dx PST = 0x1, {PST = 0xB, DD = source operand}
sub.l Dy,<ea>x PST = 0x1, {PST = 0xB, DD = source}, {PST = 0xB, DD = destination}
suba.l <ea>y,Ax PST = 0x1, {PST = 0xB, DD = source operand}
subi.l #<data>,Dx PST = 0x1
subq.l #<data>,<ea>x PST = 0x1, {PST = 0xB, DD = source}, {PST = 0xB, DD = destination}
subx.l Dy,Dx PST = 0x1
swap.w Dx PST = 0x1
tpf PST = 0x1
tpf.l #<data> PST = 0x1
tpf.w #<data> PST = 0x1
trap #<data> PST = 0x1
1
tst.b <ea>x PST = 0x1, {PST = 0x8, DD = source operand}
tst.l <ea>y PST = 0x1, {PST = 0xB, DD = source operand}
tst.w <ea>y PST = 0x1, {PST = 0x9, DD = source operand}
unlk Ax PST = 0x1, {PST = 0xB, DD = destination operand}
wddata.b <ea>y PST = 0x4, {PST = 0x8, DD = source operand
wddata.l <ea>y PST = 0x4, {PST = 0xB, DD = source operand
wddata.w <ea>y PST = 0x4, {PST = 0x9, DD = source operand
Table 28-25. PST/DDATA Specification for User-Mode Instructions (continued)
Instruction Operand Syntax PST/DDATA