Filter
Top Products
LSI Specification
MB86617A
Rev.1.0 Fujitsu VLSI
47
BIT Bit Name Active Value Function
9~8 reserved Read - Always indicate ‘0’.
0 Indicates that CGMS information input from port A of TSP IC I/F is not changed.
7 CG chg-A Read
1
Indicates that CGMS information input from port A of TSP IC I/F is changed.
Clears to ‘0’ by lead of this register.
0 Indicates that TS classification ID input from port A of TSP IC I/F is not changed.
6 TS chg-A Read
1
Indicates that TSCH classification ID input from port B of TSP IC I/F is not
consistent with TSCH classification ID (10h-bit12 to 7 set TS-ID-A or 12h-bit12 to
7 set TS-ID-B) to be stored to FIFO.
Clears to ‘0’ by lead of this register.
0
Indicates that synchronization byte of received MPEG2-TS input from CP-IC by
bridge-Bch is 47h
5 no 47h-A Read
1
Indicates that synchronization byte of received MPEG2-TS input from CP-IC by
bridge-Bch is not 47h
Clears to ‘0’ by lead of this register.
0 Indicates that FIFO on TSP IC I/F side of bridge-Ach is not full.
4
TSP FIFO
full-A
Read
1 Indicates that FIFO on TSP IC I/F side of bridge-Ach is full.
0 Indicates that FIFO on TSP IC I/F side of bridge-Ach is not empty.
3
TSP FIFO
emp-A
Read
1 Indicates that FIFO on TSP IC I/F side of bridge-Ach is empty.
0 Indicates transmit data length input from TSP IC I/F is normal.
2
Tx-length-err -
A
Read
1
Indicates transmit data length input from TSP IC I/F is not consistent with
specified format data length.
Deletes transmit data without writing into FIFO.
Clears to ‘0’ by lead of this register.
1 - 0 reserved Read - Always indicate ‘0’.