Filter
Top Products
Configuring ScanSnap Manager (for Mac OS Users)
290
■ How to Configure Scan Settings
You can configure scan settings in the ScanSnap setup window depending on your intended
use in the following procedure.
1. Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to "ScanSnap Manager Menu"
(page 273).
D The ScanSnap setup window appears.
2. Click the [Detail] button to switch to the detail view mode.
zUsing the Quick Menu
zWithout Using the Quick Menu
HINT
You can also open the ScanSnap setup window by pressing simultaneously the [command ( )] and
[S] keys on the keyboard. This operation is only enabled when ScanSnap Manager is active (when
"ScanSnap Manager" is displayed in the menu bar).
HINT
The ScanSnap setup window retains the display status from the last time the ScanSnap was used.
For example, if it was closed in detail view mode, the window is displayed in detail view mode next
time you open it.
Outline view Detail view
Outline view
Detail view