Filter
Top Products
Cleaning the Inside of the ScanSnap
447
How to perform cleaning
1. Unplug the cables from the ScanSnap.
2. Pull the ADF release tab to open the ADF top section.
3. Clean the following locations with a cloth moistened with Cleaner F1.
ATTENTION
z Do not use water or mild detergent to clean the inside of the ScanSnap.
z It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the cloth
with moderate quantity.
Wipe off the cleaner completely to leave no residue on the cleaned parts.
ADF release tab
ADF top section
ADF paper chute (cover)
Pick spring (metal part)
*gray part
Idler roller (×4)
Glass (×2)
(including the one on the ADF
top section)
Pick roller
White backing strip (×2)
(including the one on the ADF
top section)
Pad assy