Fujitsu S1300i Scanner User Manual


 
Cleaning the Inside of the ScanSnap
446
Cleaning the Inside of the ScanSnap
Scanning continuously may cause dust and paper dust to accumulate inside the ScanSnap
and result in scanning error.
As a guideline, the inside of the ScanSnap should be cleaned every 200 sheets scanned.
Note that this guideline varies depending on the types of documents you scan. For instance, it
may be necessary to clean the scanner more frequently when you scan documents on which
the toner is not sufficiently fused.
WARNING
z Before you perform cleaning, you must turn off the ScanSnap and unplug the cables to
avoid the risk of fire or electric shock.
z Do not place internal parts of the scanner (e.g. pad assy, pick roller) anywhere within reach
of small children.
z Do not use aerosol spray or spray that contains alcohol to clean the scanner. Dust blown
up by strong air from the spray may enter inside of the scanner which may cause scanner
failure or malfunction.
Also note that sparks generated by static electricity may cause a fire.
z The glasses inside the scanner become very hot when the ScanSnap is being used.
Unplug the cables from the ScanSnap and wait for at least 15 minutes before cleaning.
CAUTION
z When you perform cleaning, be careful not to get your hand or the cloth caught on the pick
spring (metal part) as a deformed pick spring may cause injury.
HINT
Check the number of sheets scanned in the following procedure.
Select [Help] J [About ScanSnap Manager] J [Detail] button in the Right-Click Menu to display the
[ScanSnap Manager - Scanner and driver information] dialog box, and then see [Total page count].
Select [Help] J [About ScanSnap Manager] J [Detail] button in the ScanSnap Manager menu to display
the [ScanSnap Manager - Scanner and driver information] window, and then see [Total page count].