Filter
Top Products
Replacing the Pick Roller
462
11.Attach the sheet guide.
Hold the squeeze clips on both sides, and attach the sheet guide.
D It clicks when the squeeze clips are released.
12.Close the ADF top section.
D It clicks when it returns to its original position.
13.Connect the power cable to the AC outlet or the USB bus power cable,
and turn on the ScanSnap.
ATTENTION
Confirm that the sheet guide is attached properly. Otherwise, paper jams or other feeding errors
may occur.
Sheet guide
Squeeze clip
Squeeze clip
ADF paper
chute (cover)
ADF top section