Filter
Top Products
4-17
Paper Source: Specifies which paper tray the paper is to be drawn from. The options on the
pull-down menu are as follows:
Auto Select - Sends job to the tray on the printer holding the paper size specified in the
document.
Envelope Feeder - Sends the job to the envelope feeder. Greyed out unless the feeder is
installed.
Manual Feed - Sends the job to the Multi-Purpose Feeder (Tray 1).
Tray 1 - Sends the job to the Multi-Purpose Feeder (Tray 1) of the printer
Tray 2-4 - Sends the job to the standard lower paper tray of the printer (Tray 2) or an addi-
tional lower paper tray (Tray 3-4), if present.
Media Defines the type of paper being used. Options include plain paper, prepunched,
letterhead, transparencies and labels. If a Paper Type has been defined for one
or more of the printer’s trays (using the front panel of the printer), this selection
can be used to send the job to the appropriate tray. For example, if Tray 2 has
been specified as “Letterhead,” selecting “Letterhead” from this list will direct
output to Tray 2 automatically.