Filter
Top Products
10-22
3. Remove the duplexing unit of the printer (if
equipped) by pushing inward on the green
tabs to the left and right of the unit (as
shown). Grasp and pull the duplexing unit
out of the printer.
4. If paper is jammed around the fusing unit,
lift up on the fuser release levers (#1 in the
diagram) and remove any jammed paper
from the fuser by pulling up and out of the
printer.
5. Return the fuser release levers to their
original positions and reinsert the duplexing
unit (if equipped). Be sure to latch the
duplexing unit back into place by sliding the
two green tabs outward.