Filter
Top Products
5-3
Windows NT 4.0 Software Installation
1. Go to the Start menu of Windows NT 4.0,
then up to Settings and select Printers. In
the Printers window, double-click the Add
Printer icon to start the Add Printer Wizard.
2. The first window of the Add Printer Wizard
will ask if the printer is connected to the
local computer (“My Computer”) or to a
Network Printer Server.
Select “My Computer” unless the printer
that you are selecting is attached to
another PC or accessed via an NT or
Win2000 server.
Note: If setting up the printer as a stand-
alone Ethernet network device, select “My
Computer” at this point and install the
driver as if the printer were connected to
the parallel (LPT1:) port of the PC. After the
installation, refer to the NT 4.0 section in
Chapter 7 of this manual (Networking the
Elite 21 Series Printer) for instructions on
configuring the printer as a network device.
Click Next.