Filter
Top Products
3-6
Windows 95/98 Software Installation - Using the Add Printer Wizard
1. Go to the Start menu of Windows 95/98,
then up to Settings and select Printers. In
the Printers window, double-click the Add
Printer icon to start the Add Printer Wizard.
Click Next to start the Wizard
2. The first window of the Add Printer Wizard
will ask if the printer is connected to the
local computer or to a Network.
Select “Local Printer” unless the printer that
you are selecting is attached to another PC
or accessed via an NT or Win2000 server.
Click Next.
Note: If setting up the printer as a stand-
alone Ethernet network device, select
“Local Printer” at this point and install the
driver as if the printer were connected to
the parallel (LPT1:) port of the PC. After the
installation, refer to the Windows 95/98
instructions in Section 7 of this manual
(Networking the Elite 21 Printer) for
instructions on configuring the printer as a
network device.