Filter
Top Products
5-9
The Page Setup Window contains the following options for selection:
Paper Size: Selects the Paper Size being printed to. This pull-down menu brings up a list of
paper sizes supported by the Elite 21 printer
Paper Source: Specifies which paper tray the paper is to be drawn from. The options on the
pull-down menu are as follows:
Auto Select - Sends job to the tray on the printer
holding the paper size specified in the document.
Envelope Feeder - Sends the job to the
envelope feeder. Greyed out unless the feeder is
installed.
Manual Feed - Sends the job to the Multi-
Purpose Feeder (Tray 1).
Tray 1 - Sends the job to the Multi-Purpose
Feeder (Tray 1) of the printer
Tray 2-4 - Sends the job to the standard lower
paper tray of the printer (Tray 2) or an additional
lower paper tray (Tray 3-4), if present.
Orientation: Selects the page orientation, Portrait or Landscape, by clicking on the
appropriate radio button.
Margins: Selects left, right, top and bottom margins for the document.
After making all necessary selections in this window, click Finish to accept the settings and
apply them to the document.