Filter
Top Products
5-15
Setting Defaults Using Driver Properties
Typically, changes made within the Page Setup, Print or Print Properties dialog windows will
only take effect for the particular document that you are printing. Changes to the default
settings used by the driver are made from the Driver Properties section of Windows NT 4.0.
To access these settings, go to the Start menu in Windows NT 4.0, go up to Settings and select
Printers. Locate the icon for the Elite 21 printer, then right-click the icon and go to Properties.
The following window will appear:
The tabs at the top of the Properties window allow different categories of settings to be
accessed. The
General tab identifies the printer name and allows Comment and Location
information about the printer to be entered. This information is helpful in locating the printer
over a network. This window also allows a new printer driver to be selected, or a test page to
be sent to the printer.