Filter
Top Products
Configuration Menu 102
SNMPv3 Target Parameters Table configuration
Command: /cfg/sys/ssnmp/snmpv3/tparam
[SNMPv3 snmpTargetParamsTable 1 Menu]
name - Set targetParams name
mpmodel - Set message processing model
model - Set security model
uname - Set USM user name
level - Set minimum level of security
del - Delete targetParamsTable entry
cur - Display current targetParamsTable configuration
You can configure the target parameters entry and store it in the target parameters table in the SNMP engine. This
table contains parameters that are used to generate a message. The parameters include the message processing
model (for example: SNMPv3, SNMPv2c, SNMPv1), the security model (for example: USM), the security name, and
the security level (noAuthnoPriv, authNoPriv, or authPriv).
The following table describes the SNMPv3 Target Parameters Table Configuration Menu options.
Table 94 SNMPv3 Target Parameters Table Configuration Menu options
Command Description
name <1-32
characters>
Configures the locally arbitrary, but unique identifier that is associated with this entry.
mpmodel
snmpv1|snmpv2c|snmp
v3
Configures the message processing model that is used to generate SNMP messages.
model
usm|snmpv1|snmpv2
Selects the security model to be used when generating the SNMP messages.
uname <1-32
characters>
Defines the name that identifies the user in the USM table, on whose behalf the SNMP
messages are generated using this entry.
level
noAuthNoPriv|authNo
Priv|authPriv
Selects the level of security to be used when generating the SNMP messages using this entry.
The level
noAuthNoPriv means that the SNMP message will be sent without authen-
tication and without using a privacy protocol. The level
authNoPriv means that the SNMP
message will be sent with authentication but without using a privacy protocol. The
authPriv means that the SNMP message will be sent both with authentication and using a
privacy protocol.
del Deletes the targetParamsTable entry.
cur Displays the current targetParamsTable configuration.
SNMPv3 Notify Table configuration
Command: /cfg/sys/ssnmp/snmpv3/notify
[SNMPv3 snmpNotifyTable 1 Menu]
name - Set notify name
tag - Set notify tag
del - Delete notifyTable entry
cur - Display current notifyTable configuration
SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for particular events
or conditions, and generates Notification-Class messages based on these events or conditions.