Filter
Top Products
Configuration Menu 91
System host log configuration
Command: /cfg/sys/syslog
[Syslog Menu]
host - Set IP address of first syslog host
host2 - Set IP address of second syslog host
sever - Set the severity of first syslog host
sever2 - Set the severity of second syslog host
facil - Set facility of first syslog host
facil2 - Set facility of second syslog host
console - Enable/disable console output of syslog messages
log - Enable/disable syslogging of features
cur - Display current syslog settings
The following table describes the Syslog Configuration Menu options.
Table 81 Syslog Configuration Menu options
Command Description
host <IP address> Sets the IP address of the first syslog host. For example,
100.10.1.1
host2 <IP address> Sets the IP address of the second syslog host. For example,
100.10.1.2
sever <1-7> Sets the severity level of the first syslog host displayed. The
default is 7, which means log all the seven severity levels.
sever2 <1-7> Sets the severity level of the second syslog host displayed. The
default is 7, which means log all the seven severity levels.
facil <1-7> This option sets the facility level of the first syslog host
displayed. The default is 0.
facil2 <1-7> This option sets the facility level of the second syslog host
displayed. The default is 0.
console disable|enable Enables or disables delivering syslog messages to the console.
When necessary, disabling console ensures the GbE2
Interconnect Switch is not affected by syslog messages. It is
enabled by default.
log <feature|all> enable|disable Displays a list of features for which syslog messages can be
generated. You can choose to enable/disable specific
features or enable/disable syslog on all available features.
Features include:
• console
• system
• mgmt
• cli
• stg
• vlan
• ssh
• vrrp
• ntp
• hotlink
• ip
• web
• ospf
• rmon
• ufd
• 802.1x
• cfg
cur Displays the current syslog settings.