Filter
Top Products
Statistics Menu 79
Table 67 OSPF global statistics
Statistic Description
unloop The sum total number of interfaces, connected to the attached network in all OSPF areas.
wait timer The sum total number of times the Wait Timer has been fired, indicating the end of the
waiting period that is required before electing a (Backup) Designated Router across all
OSPF areas and interfaces.
backup The sum total number of Backup Designated Routers on the attached network for all OSPF
areas and interfaces.
nbr change The sum total number of changes in the set of bidirectional neighbors associated with any
interface across all OSPF areas.
Timers Kickoff:
hello The sum total number of times the Hello timer has been fired (which triggers the send of a
Hello packet) across all OPSF areas and interfaces.
retransmit The sum total number of times the Retransmit timer has been fired across all OPSF areas and
interfaces.
lsa lock The sum total number of times the Link State Advertisement (LSA) lock timer has been fired
across all OSPF areas and interfaces.
lsa ack The sum total number of times the LSA Ack timer has been fired across all OSPF areas and
interfaces.
dbage The total number of times the data base age (Dbage) has been fired.
summary The total number of times the Summary timer has been fired.
ase export The total number of times the Autonomous System Export (ASE) timer has been fired.
VRRP statistics
Virtual Router Redundancy Protocol (VRRP) support on the GbE2 Interconnect Switch provides redundancy between
routers in a LAN. This is accomplished by configuring the same virtual router IP address and ID number on each
participating VRRP-capable routing device.
One of the virtual routers is then elected as the master, based on a number of priority criteria, and assumes control of
the shared virtual router IP address. If the master fails, one of the backup virtual routers will assume routing authority
and take control of the virtual router IP address.
When virtual routers are configured, you can display the following protocol statistics for VRRP:
• Advertisements received (vrrpInAdvers)
• Advertisements transmitted (vrrpOutAdvers)
• Advertisements received, but ignored (vrrpBadAdvers)
Command: /stats/l3/vrrp
>> Layer 3 Statistics# vrrp
VRRP statistics:
vrrpInAdvers: 0 vrrpBadAdvers: 0
vrrpOutAdvers: 0
vrrpBadVersion: 0 vrrpBadVrid: 0
vrrpBadAddress: 0 vrrpBadData: 0
vrrpBadPassword: 0 vrrpBadInterval: 0