Filter
Top Products
Configuration Menu 90
The following table describes the System Configuration Menu options.
Table 80 System Configuration Menu options
Command Usage
syslog Displays the Syslog Menu.
sshd Displays the SSH Server Menu.
radius Displays the RADIUS Authentication Menu.
tacacs+ Displays the TACACS+ Menu.
ntp Displays the Network Time Protocol (NTP) Server Menu.
ssnmp Displays the System SNMP Menu.
access Displays the System Access Menu.
date Prompts the user for the system date.
time Configures the system time using a 24-hour clock format.
timezone Configures the time zone where the switch resides. You are prompted
to select your location (continent, country, region) by the timezone
wizard. Once a region is selected, the switch updates the time to
reflect local changes to Daylight Savings Time, etc.
olddst
Enables or disables use of the Daylight Saving Time (DST) rules in
effect prior to the year 2007. The default value is
disabled.
idle <1-60> Sets the idle timeout for CLI sessions, from 1 to 60 minutes. The default
is 5 minutes.
notice <1-1024 character multi-
line> <'-' to end>
Displays login notice immediately before the “Enter password:”
prompt. This notice can contain up to 1024 characters and new lines.
bannr <1-80 characters>
Configures a login banner of up to 80 characters. When a user or
administrator logs into the GbE2 Interconnect Switch, the login banner
is displayed. It is also displayed as part of the output from the
/info/sys/gen command.
hprompt disable|enable Enables or disables displaying of the host name (system administrator’s
name) in the command line interface.
bootp disable|enable Enables or disables the use of BOOTP. If you enable BOOTP, the
GbE2 Interconnect Switch will query its BOOTP server for all of the
GbE2 Interconnect Switch IP parameters. The default is enable.
reminders disable|enable Enables or disables reminder messages in the CLI. The default value is
enabled.
cur Displays the current system parameters.