Filter
Top Products
Configuration Menu 106
Table 100 HTTPS Access Configuration menu options
Command Description
certSave Allows the client, or the Web browser, to accept the certificate and save the certificate to
Flash to be used when the switch is rebooted.
cur Displays the current SSL Web Access configuration.
Port configuration
Command: /cfg/port <port number>
[Port 1 Menu]
gig - Gig Phy Menu
fiber - Fiber Link Menu
aclqos - Acl/Qos Configuration Menu
8021ppri - Set default 802.1p priority
pvid - Set default port VLAN id
name - Set port name
rmon - Enable/Disable RMON for port
tag - Enable/disable VLAN tagging for port
tagpvid - Enable/disable tagging on pvid
brate - Set BroadCast Threshold
mrate - Set MultiCast Threshold
drate - Set Dest. Lookup Fail Threshold
ena - Enable port
dis - Disable port
cur - Display current port configuration
This menu enables you to configure settings for individual GbE2 Interconnect Switch ports. This command is enabled
by default.
The following table describes the Port Configuration Menu options.
Table 101 Port Configuration Menu options
Command Description
gig Displays the Gigabit Ethernet Physical Link Menu.
fiber Displays the Fiber Link Menu.
aclqos Displays the ACL Quality of Service Menu.
8021ppri Configures the port’s 802.1p priority level.
pvid <1-4095> Sets the default VLAN number which will be used to forward frames
which are not VLAN tagged. The default number is 1.
NOTE: VLAN 4095 is reserved for switch management.
name <1-64 characters>|none Sets a name for the port (maximum 64 characters). The assigned port
name displays next to the port number on some information and statistics
screens.
rmon disable|enable Enables or disables Remote Monitoring for the port. RMON must be
enabled for any RMON configurations to function.
tag disable|enable Disables or enables VLAN tagging for this port. It is disabled by default.
tagpvid disable|enable Disables or enables VLAN tag persistence. When disabled, the VLAN tag
is removed from packets whose VLAN tag matches the port PVID. The
default value is
enabled.
brate <0-262143>|dis Limits the number of broadcast packets per second to the specified value.
If disabled (
dis), the port forwards all broadcast packets.
mrate <0-262143>|dis Limits the number of multicast packets per second to the specified value. If
disabled (
dis), the port forwards all multicast packets.
drate <0-262143>|dis Limits the number of unknown unicast packets per second to the specified
value. If disabled (
dis), the port forwards all unknown unicast packets.
ena Enables the port.