Filter
Top Products
Information Menu 46
Show all IP Route information
Command: /info/l3/route/dump
Status code: * - best
Destination Mask Gateway Type Tag Metr If
--------------- --------------- --------------- --------- --------- ---- --
* 11.0.0.0 255.0.0.0 11.0.0.1 direct fixed 211
* 11.0.0.1 255.255.255.255 11.0.0.1 local addr 211
* 11.255.255.255 255.255.255.255 11.255.255.255 broadcast broadcast 211
* 12.0.0.0 255.0.0.0 12.0.0.1 direct fixed 12
* 12.0.0.1 255.255.255.255 12.0.0.1 local addr 12
* 12.255.255.255 255.255.255.255 12.255.255.255 broadcast broadcast 12
* 13.0.0.0 255.0.0.0 11.0.0.2 indirect ospf 2 211
* 47.0.0.0 255.0.0.0 47.133.88.1 indirect static 24
* 47.133.88.0 255.255.255.0 47.133.88.46 direct fixed 24
* 172.30.52.223 255.255.255.255 172.30.52.223 broadcast broadcast 2
* 224.0.0.0 224.0.0.0 0.0.0.0 martian martian
* 224.0.0.5 255.255.255.255 0.0.0.0 multicast addr
The following table describes the Type parameter.
Table 31 IP Routing Type information
Field Description
indirect The next hop to the host or subnet destination will be forwarded through a router at the
Gateway address.
direct Packets will be delivered to a destination host or subnet attached to the switch.
local Indicates a route to one of the switch’s IP interfaces.
broadcast Indicates a broadcast route.
martian The destination belongs to a host or subnet which is filtered out. Packets to this
destination are discarded.
multicast Indicates a multicast route.
The following table describes the Tag parameter.
Table 32 IP Routing Tag information
Field Description
fixed The address belongs to a host or subnet attached to the switch.
static The address is a static route which has been configured on the GbE2 Switch.
addr The address belongs to one of the switch’s IP interfaces.
rip The address was learned by the Routing Information Protocol (RIP).
ospf The address was learned by Open Shortest Path First (OSPF).
broadcast Indicates a broadcast address.
martian The address belongs to a filtered group.
ARP information
Command: /info/arp
[Address Resolution Protocol Menu]
find - Show a single ARP entry by IP address
port - Show ARP entries on a single port
vlan - Show ARP entries on a single VLAN
addr - Show ARP address list
dump - Show all ARP entries
The Address Resolution Protocol (ARP) information includes IP address and MAC address of each entry, address status
flags, VLAN, and port for the address, and port referencing information.