Filter
Top Products
Information Menu 45
The following table describes the Layer 3 Information Menu options.
Table 29 Layer 3 information menu options
Command Usage
route Displays the IP Routing Menu. Using the options of this menu, the system displays the following for
each configured or learned route:
• Route destination IP address, subnet mask, and gateway address
• Type of route
• Tag indicating origin of route
• Metric for RIP tagged routes, specifying the number of hops to the destination (1-15 hops, or 16
for infinite hops)
• The IP interface that the route uses
arp Displays the Address Resolution Protocol (ARP) Information Menu.
ospf Displays OSPF routing Information Menu.
rip Displays Routing Information Protocol Menu.
ip Displays IP Information. IP information, includes:
• IP interface information: Interface number, IP address, subnet mask, VLAN number, and
operational status.
• Default gateway information: Metric for selecting which configured gateway to use, gateway
number, IP address, and health status
• IP forwarding information: Enable status, lnet and lmask
• Port status
igmp Displays IGMP Information Menu.
vrrp Displays the VRRP Information Menu.
dump Dumps all switch information available from the Layer 3 Menu (10K or more, depending on your
configuration).
If you want to capture dump data to a file, set your communication software on your workstation to
capture session data prior to issuing the dump commands.
Route information
Command: /info/l3/route
[IP Routing Menu]
find - Show a single route by destination IP address
gw - Show routes to a single gateway
type - Show routes of a single type
tag - Show routes of a single tag
if - Show routes on a single interface
dump - Show all routes
Using the commands listed below, you can display all or a portion of the IP routes currently held in the switch.
Table 30 Route Information menu options
Command Usage
find <IP address> Displays a single route by IP address.
For example, 100.10.1.1
gw <IP address> Displays routes to a single gateway.
For example, 100.10.1.2
type indirect|direct|local|
broadcast|martian|multicast
Displays routes of a single type.
tag fixed|static|addr|rip|ospf|
broadcast|martian|multicast
Displays routes of a single tag.
if <IP address> Displays routes on a single interface.
dump Displays all routes configured in the switch.