Filter
Top Products
Configuration Menu 111
Layer 2 configuration
Command: /cfg/l2
[Layer 2 Menu]
8021x - 802.1x Menu
mrst - Multiple Spanning Tree/Rapid Spanning Tree Menu
stp - Spanning Tree Menu
fdb - FDB Menu
trunk - Trunk Group Menu
thash - IP Trunk Hash Menu
lacp - Link Aggregation Control Protocol Menu
hotlink - Hot Links Menu
vlan - VLAN Menu
upfast - Enable/disable Uplink Fast
update - UplinkFast station update rate
cur - Display current layer 2 parameters
The following table describes the Layer 2 Configuration Menu options.
Table 110 L2 Configuration Menu options
Command Description
8021x Displays the 802.1x Configuration Menu.
mrst Displays the Rapid Spanning Tree/Multiple Spanning Tree Protocol
Configuration Menu.
stp Displays the Spanning Tree Configuration Menu.
fdb Displays the Forwarding Database Configuration Menu.
trunk <1-12> Displays the Trunk Group Configuration Menu.
thash Displays the IP Trunk Hash Menu.
lacp Displays the Link Aggregation Control Protocol Menu.
hotlink Displays the Hot Links Menu.
vlan <1-4095> Displays the VLAN Configuration Menu.
upfast enable|disable Enables or disables Fast Uplink Convergence, which provides rapid Spanning
Tree convergence to an upstream switch during failover.
NOTE: When enabled, this feature increases bridge priorities to 65500 for all STGs and path cost by 3000 for all external
STP ports.
update <10-200> Configures the station update rate, in packets per second.
The default value is 40.
cur Displays current Layer 2 parameters.
802.1x configuration
Command: /cfg/l2/8021x
[802.1x Configuration Menu]
global - Global 802.1x configuration menu
port - Port 802.1x configuration menu
ena - Enable 802.1x access control
dis - Disable 802.1x access control
cur - Show 802.1x configuration