Filter
Top Products
Configuration Menu 131
IP Access List configuration
Command: /cfg/l3/rmap <1-32>/alist <1-8>
[IP Access List 1 Menu]
nwf - Network Filter number
metric - Metric
action - Set Network Filter action
enable - Enable Access List
disable - Disable Access List
delete - Delete Access List
current - Display current Access List configuration
The route map number (1-32) and the access list number (1-8) represent the IP access list you wish to configure. The
following table describes the IP Access List Configuration Menu options.
Table 142 IP Access List Configuration Menu options
Command Description
nwf <1-256> Sets the network filter number.
metric <1-4294967294>|none Sets the metric value in the AS-External (ASE) LSA.
action permit|deny Permits or denies action for the access list.
enable Enables the access list.
disable Disables the access list.
delete Deletes the access list.
cur Displays the current Access List configuration.
Autonomous System Path configuration
Command: /cfg/l3/rmap <1-32>/aspath <1-8>
[AS Filter 1 Menu]
as - AS number
action - Set AS Filter action
enable - Enable AS Filter
disable - Disable AS Filter
delete - Delete AS Filter
current - Display current AS Filter configuration
The rmap number (1-32) and the path number (1-8) represent the AS path you wish to configure. The following table
describes the Autonomous System Path Configuration Menu options.
Table 143 Autonomous System Path Configuration Menu options
Command Description
as <1-65535> Sets the Autonomous System filter’s path number.
action permit|deny Permits or denies Autonomous System filter action.
enable Enables the Autonomous System filter.
disable Disables the Autonomous System filter.
delete Deletes the Autonomous System filter.
cur Displays the current Autonomous System filter configuration.