Filter
Top Products
Configuration Menu 152
Table 175 IPv4 Filter Configuration Menu options
Command Description
reset Resets the IPv4 parameters for the ACL to their default values.
cur Displays the current IPV4 parameters.
ACL TCP/UDP Filter configuration
Command: /cfg/acl/acl <1-4096>/tcpudp
[Filtering TCP/UDP Menu]
sport - Set to filter on TCP/UDP source port
dport - Set to filter on TCP/UDP destination port
flags - Set to filter TCP/UDP flags
reset - Reset all fields
cur - Display current parameters
This menu allows you to define TCP/UDP matching criteria for an ACL. The following table describes the TCP/UDP
Filter Configuration Menu options.
Table 176 TCP/UDP Filter Configuration Menu options
Command Description
sport <1-65535> Defines a source port for the ACL. If defined, traffic with the specified TCP or UDP
source port will match this ACL. Specify the port number. Listed below are some of
the well-known ports:
Number Name
20 ftp-data
21 ftp
22 ssh
23 telnet
25 smtp
37 time
42 name
43 whois
53 domain
69 tftp
70 gopher
79 finger
80 http
dport <1-65535> Defines a destination port for the ACL. If defined, traffic with the specified TCP or
UDP destination port will match this ACL. Specify the port number, just as with
sport above.
flags <value (0x0-0x3f)> Defines a TCP/UDP flag for the ACL.
reset Resets the TCP/UDP parameters for the ACL to their default values.
cur Displays the current TCP/UDP Filtering parameters.