Filter
Top Products
Configuration Menu 126
Layer 3 configuration
Command: /cfg/l3
[Layer 3 Menu]
if - Interface Menu
gw - Default Gateway Menu
route - Static Route Menu
arp - ARP Menu
frwd - Forwarding Menu
nwf - Network Filters Menu
rmap - Route Map Menu
rip - Routing Information Protocol Menu
ospf - Open Shortest Path First (OSPF) Menu
igmp - IGMP Menu
dns - Domain Name System Menu
bootp - Bootstrap Protocol Relay Menu
vrrp - Virtual Router Redundancy Protocol Menu
rtrid - Set router ID
cur - Display current IP configuration
The following table describes the Layer 3 Configuration Menu options.
Table 133 L3 Configuration Menu options
Command Description
if <1-255> Displays the IP Interface Menu.
gw <1-4> Displays the IP Default Gateway Menu.
route Displays the IP Static Route Menu.
arp Displays the Address Resolution Protocol Menu.
frwd Displays the IP Forwarding Menu.
nwf <1-256> Displays the Network Filter Configuration Menu.
rmap <1-32> Displays the Route Map Menu.
rip Displays the Routing Interface Protocol Menu.
ospf Displays the OSPF Menu.
igmp Displays the IGMP Menu.
dns Displays the IP Domain Name System Menu.
bootp Displays the Bootstrap Protocol Menu.
vrrp Displays the Virtual Router Redundancy Configuration Menu.
rtrid <IP address> Sets the router ID.
cur Displays the current IP configuration.
IP interface configuration
Command: /cfg/l3/if <1-255>
[IP Interface 1 Menu]
addr - Set IP address
mask - Set subnet mask
vlan - Set VLAN number
relay - Enable/disable BOOTP relay
ena - Enable IP interface
dis - Disable IP interface
del - Delete IP interface
cur - Display current interface configuration
The GbE2 Interconnect Switch can be configured with up to 255 IP interfaces. Each IP interface represents the GbE2
Interconnect Switch on an IP subnet on your network. The IP Interface option is disabled by default.
The following table describes the IP Interface Configuration Menu options.
Table 134 IP Interface Configuration Menu options