Filter
Top Products
Information Menu 38
The following table describes the IEEE 802.1p port priority information.
Table 24 802.1p Port Priority information
Command Usage
Port Displays the port number.
Priority Displays the 802.1p Priority level.
Cosq Displays the Class of Service queue.
Weight Displays the scheduling weight.
Spanning Tree information
Command: /info/l2/stp
Spanning Tree Group 1: On (STP/PVST)
VLANs: 1
Current Root: Path-Cost Port Hello MaxAge FwdDel Aging
8000 00:02:a5:d1:0f:ed 8 20 2 20 15 180
Parameters: Priority Hello MaxAge FwdDel Aging
32768 2 20 15 180
Port Priority Cost FastFwd State Designated Bridge Des Port
---- -------- ---- -------- ---------- --------------------- -------
1 0 0 n FORWARDING *
2 0 0 n FORWARDING *
3 0 0 n FORWARDING *
The GbE2 Interconnect Switch software uses the IEEE 802.1d Spanning Tree Protocol (STP). If RSTP/MSTP is turned
on, see the “Rapid Spanning Tree information” section for Spanning Tree Group information. In addition to seeing if
STP is enabled or disabled, you can view the following STP bridge information:
• Current root MAC address
• Path-Cost
• Port
• Hello interval
• Maximum age value
• Forwarding delay
• Aging time
You can also refer to the following port-specific STP information:
• Port number and priority
• Cost
• State
• Port Fast Forwarding state
• Designated bridge
• Designated port