Filter
Top Products
Yes
Sets the router to add routes received in RIP updates from neighboring routers to its
own internal routing table.
RIP Supply
Enables or disables the RIP supply function, determining whether the XNS router
transmits periodic RIP updates to neighboring routers across the Circuit Group.
Default: Yes
No
Prevents the router from transmitting updates. Use this setting to inactivate RIP for
circuit groups configured with static routes.
Yes
Allows the router to transmit RIP updates.
Socket (high)
Sets the upper boundary of the range for filtering XNS source or destination sockets
when creating a Socket list.
Options
Leave this field blank and enter the XNS socket number in the Socket (low) field if
you are filtering a single XNS source or destination socket.
Enter the highest XNS socket number in the range if you are filtering a range of
XNS source or destination sockets,
For additional information, refer to “Socket (low)” later in this chapter. To learn how
to assign a Socket list to a filter, refer to “Dest Socket (low)” and “Source Socket
(low).”
Socket (low)
Sets the lower boundary of the range for filtering XNS source or destination sockets
when creating a Socket list.
Options
Enter the XNS socket number in this field and leave the Socket (high) field blank
if you are filtering a single XNS source or destination socket.
Enter the lowest XNS socket number in this field and enter the highest socket
number in the Socket (high) field if you are filtering a range of XNS source or
destination sockets.
For additional information, refer to “Socket (high)” earlier in this chapter. To learn
how to assign a Socket list to a filter, refer to “Dest Socket (low)” and “Source
Socket (low).”
Source Route
(Token Ring)
Enables or disables source routing over token ring media for the interface being
defined. Source route functionality allows the XNS router to transmit and receive
frames over a token ring network extended with source routing bridges. For the HP
router TR, this option can be set to either Yes or No, depending on whether or not
you want to use the token ring capability.
Default: No
XNS Router
Parameters
10
Xerox Network Systems (XNS) Router Parameters
Parameters and Options
10-11