HP (Hewlett-Packard) 400 Network Router User Manual


 
Checksum...12-6
checksum, faulty...15-15
Checksums On...10-4
Circuit Group...7-9, 10-4, 11-6, 12-6
Circuit Group Name...6-7, 8-6,12-14
Circuits...5-3
Circuit Group Speed...5-3
Circuit Name...6-7, 13-5
Circuits...3-3, 4-7, 5-3
Circuit Type...4-7, 13-5
Circuits
ARP Group Address...4-5
Auto Enable...4-5
Call restrictions...4-6
Channel Management...4-6
Circuit Group Name...5-3
Circuit Group Speed...5-3
Circuit is enabled...4-11
Circuit Type...4-7
Compression...4-9
Connect inactivity time (sec)...4-10
Connect Retries...4-10
Connect retry count...4-10
Connect wait time (sec)...4-10
Connect when...4-11
Data is available or on incoming calls...4-11
Data Link Layer Protocol...4-11
Desired Link Quality...4-12
DLCI Encoding Length...4-13
Echo Request Times (sec)...4-14
Events for Error...4-14
Extended (32-bit) CRC...4-14
Group Address...4-15
Hearbeat Down Count...4-15
Hearbeat Polling Interval...4-15
Individual Address...4-15
Interval Between Polls...4-15
IP Address...4-15
LAN Address...4-15
LCP Active-Open...4-17
LCP Auto Restart...4-17
Link Idle Time (T3)...4-17
LQM Time (secs)...4-17
Management Type...4-18
Max channels to aggregate...4-19
Max Link Latency (ms)...4-19
4-Index