Filter
Top Products
Rgetatr: Displaying the AppleTalk Routing
Table
Use NCL’s Rgetatr command to format and display the AppleTalk routing
table for a local or remote HP or Wellfleet router.
Syntax
rgetatr [X.X.X.X] [community]
[X.X.X.X] (optional) is the IP address of the local or remote
router in dotted decimal notation. If you omit this field, an IP
address on the local router will be used.
[community] (optional) is the name of the SNMP community
that grants access to that node. If you omit the name, public is
used. If you include a name, the IP address must also be included.
Example
rgetatr 15.2.1.94
Displays the AppleTalk router configuration table for the node
with IP address 15.2.1.94:
Destination Next Hop Hop IF
100-109 100.38 0 3
120-129 129.47 2 2
160-160 160.37 0 2
180-180 180.232 2 2
200-200 200.147 2 2
600-600 600.83 1 2
The fields in the table are as follows:
Destination lists the destination network range.
Next Hop lists the AppleTalk node address (the network number
and node identifier pair) of the next hop router.
Hop lists the hop count to Destination.
IF lists the number the router assigned to the network interface for
Next Hop.
Using the Network Control Language
Accessing Bridging and Routing Tables
16-58