Filter
Top Products
packet. The values are listed in tables 17-2 and table 17-3, at the end of
this X.25 section.
high lcn (
xx
) < low lcn (
yy
); using (
yy
) for both
Meaning: The high LCN (logical channel number) is lower than the low LCN
configured for an X.25 circuit. The value given by the low LCN (yy) will
be used for both
LCNs.
Action: Modify the configuration to configure Low
LCN and High LCN
parameters correctly.
high lcn – low lcn > max lcns (
xx
); using (
yy
) for high lcn
Meaning: The difference between the high LCN (logical channel number) and low
LCN values is greater than the maximum number of LCNs allowed for the
circuit. The high
LCN will be adjusted downward to yy to allow the
maximum number of
LCNs to be configured.
Action: Modify the configuration to configure Low
LCN and High LCN
parameters correctly.
high LCN
(XXXX)
> 4095: now High =
YYYY
& Low =
ZZZZ
Meaning: The High LCN value XXXX entered by the user exceeded the maximum
value allowed of 4095. The High LCN value has been adjusted
downwards to YYYY, and the Low LCN value has been adjusted
downwards to ZZZZ to bring them within legal range. For example, if
the Low LCN value entered bythe user was 5000, and the High LCN
value entered by the user was 5010, then the Low LCN and High LCN
values are adjusted downwards to 4085 and 4095, respectively. Thus, the
actual number of LCNs desired by the user (in this case, 5010 - 5000 = 10
remains unchanged (4095 - 4085 = 10).
Action: Modify the configuration.
ioctl error
xx
occurred in state
yy
Meaning: A status request of the packet-level interface has generated an error.
Event Log
Messages
17
Event Log Messages
X.25 Event Messages
17-139